50/50 E Liquid
The 88Vape Anytank 50/50 vape juice range is a versatile e-liquid that's suitable for any device and any tank. With nicotine strengths ranging from 1mg to 20mg, these perfectly balanced vape juices deliver the right amount of flavour, vapour and throat hit all in equal measure.
What Are 50/50 Liquids?
50/50 vape juice has a slightly thicker consistency and a less intense throat hit than standard PG e-liquid, but it produces more vapour. It can be used in pretty much any vape device, however we'd recommend not using more than a 6mg strength in a sub-ohm tank.
This e-liquid is made up of propylene glycol (PG) and vegetable glycerin (VG). PG provides the flavour and smooth throat hit to your vaping experience, and VG is where your vapour comes from. This means that this specific e-liquid offers both satisfying vapour production as well as fantastic flavour profiles.
PG is a thin, colourless, odourless liquid that we use to improve the viscosity of our e-liquids. It is responsible for carrying and maintaining the flavour, and an e-liquid with a high PG is better suited to vape kit with vape coils that have a higher resistance and low power.
VG is a thick, colourless liquid with a sweet taste. We use VG to thicken the e-liquid and to create the vapour clouds we all love creating. If you are using a higher VG e-liquid, stick to higher-powered vape kits, using sub-ohm coils.
An e-liquid with a higher PG ratio is thinner, has a more obvious flavour, but produces less vapour. An e-liquid that has a higher VG ratio, will be thicker with a harsher throat hit and will have bigger cloud production. 88Vape balances this perfectly with our 50/50 PG/VG e-liquids.
The nicotine strength depends on your personal preferences, but you must be sure to choose the right vape for your e-liquid strength, as this can have an effect on flavour and intensity.
These e-liquids are designed to mimic an MTL (mouth-to-lung) hit but can also be used in a DTL (direct-to-lung) device. The PG and VG combination has been balanced to provide a smooth hit, either way.
What Device Should I Use For 50/50 E-Liquids?
The e-liquid ratio is best suited to basic vape pens with non-sub-ohm coils such as our popular Cosmo A1 vape pen.
An e-liquid that evaporates quickly is ideal for a low wattage device, as this will provide more flavour and a smoother throat hit. A higher wattage might cause your e-liquid to give you a harsher throat hit, which can be especially unpleasant if you are not used to a harsher hit or are not an ex-smoker.
Smooth 50/50 Vape Juice Flavours
We offer a range of nicotine strengths for our e-liquids, ranging from 1-6mg and 11-20mg (18-20mg being 50/50 nic salts). The throat hit and flavour will differ depending on strength, but every e-liquid is delicious and perfectly balanced.
Our 6mg liquids include refreshing flavours like Grape Freeze, Mango & Strawberry Passion, and Ultra Energy. We also create sweet e-liquids that burst with sugary flavours, such as the popular New York Cheesecake, the mouth-watering Morello Cherry, and the tantalising Raspberry Ripple.
Because 88Vape is meticulous with the PG/VG ratio in these e-liquids, none of them is too sweet, too strong, or too bland. The flavour hit is perfect, and the vapour cloud production will be just right.
So, why not add click the "add to basket" button a few times and stock up on your favourite e-liquids - you know you want to!
What e-liquid should I buy?
The type of device you have dictates what type of e-liquid you should use. From there, you can choose whatever flavour picks your fancy as it's all down to personal preferences. The below are our guidelines when it comes to buying the right type of e-liquid:
Best E-Liquid for Mouth to Lung (MTL) Kit
MTL devices typically tend to go up to 14W, using a coil resistance of 1.0ohm and higher (e.g. Classic, Deluxe, Cosmo A1, ProPod).
For MTL devices, we recommend using a PG70% or 50/50 e-liquid in any nicotine strength you require (from 1mg to 20mg)
Best E-Liquid for Direct to Lung (DTL) Kit
DTL devices, also known as sub-ohms, typically tend to start at around 20W and use a coil resistance lower than 1.0ohm (e.g. ProMod on a 0.6ohm coil, 50W Mod Pen).
For sub-ohm devices, we recommend using a VG70-80% or 50/50 e-liquid with the nicotine strength no higher than 3-6mg.
What flavour e-liquid should I buy?
Flavour preference is all down to the tastes of the individual, so we can't really tell you what you should buy. However, we do have many flavours that people buy month after month and never deviate from - these are known as 'all day vapes'.
Best flavours for ex-smokers
While switching to vaping opens up a World of flavours, many ex-smokers find our tobacco, menthol and fruit based flavours a good place to start.
We recommend: Menthol Chill, Rolling Leaf, 88Fusion & Raspberry Ripple.
Best flavours for a sweet tooth
The beauty of vaping is having all of the deliciously moreish flavours to try and for some, it's a case of the sweeter the better.
We recommend: Pear Drops, Lemon Sherbet, Sweet Strawberry, H-Blue
Best flavours for adventurous vapers
If you like e-liquids with a 'kick', then our ice range are the ideal ones to try. Delicious flavours with an extreme cooling sensation. You've been warned!
We recommend: Black Ice, Cherry Coola, Cocktail Ice, Cool Fruity Fizz, Cupcake Frosting, Summer Blast.
What nicotine strength should I use?
The nicotine strength you need all depends on what your smoking habits are (or were!). There’s no hard and fast rule, so you’ll need to experiment.
But as a rule of thumb, we recommend the following based on how cigarettes you smoke per day:
15+ per day – 16mg to 20mg
10-15 per day – 11mg to 16mg
3-10 per day – 3mg to 6mg
1-2 per day – 1mg
0 – nicotine free